Smart series HZ530 16-Port UHF RFID Module is specialized module for developing 16-port fixed RFID reader and Smart RFID cabinet system. Based on Impinj R2000 chip platform, with 16 channels of SMA interfaces for RFID antennas, it support multiple-tag and long range reading.
HZ540 module supports ISO 18000-6C/6B, EPC C1G2, GBT 29768-2013, GJB 7377.1 protocol, users can communicate with their own equipment through the UART-TTL pin on the interface, and its wide power supply range (DC4. 5V~6V) and the configured GPIO interface (IO1-IO4, IO1/IO2 as input, IO3/IO4 as output) can provide users with more choices.
Due to the good card reading distance and multi-antenna design of the module, it can be used as a design solution for small readers.
★ Able to work with fixed frequency or frequency hopping
★ Optional output power, step: 1dB
★ Support polling work or designated antenna work (sixteen antenna ports)
★ Support antenna detection function
★ Support RSSI: can perceive the strength of the signal
★ Support label data filtering
★ Support anti-collision protocol
★ Support multi-label recognition
|
|
||
|
PIN |
Definition |
Description |
|
1 |
GND |
both connect to Ground |
|
2 |
GND |
|
|
3 |
4.5V-6V DC |
Both connect to Power |
|
4 |
4.5V-6V DC |
|
|
5 |
GPIO3 |
Output (3.3V) |
|
6 |
GPIO4 |
Output (3.3V) |
|
7 |
GPIO1 |
Input (3.3V) |
|
8 |
BUZ |
Buzzer driver (3.3V) |
|
9 |
UART_RXD |
TTL Electric level |
|
10 |
UART_TXD |
|
|
11 |
NC |
NC |
|
12 |
NC |
|
|
13 |
GPIO2 |
Input (3.3V) |
|
14 |
EN |
High Level Enable |
|
15 |
NC |
NC |
Table 2: Electrical Specifications
|
Dimension |
140.3 * 98.3 * 4.75mm |
|
Voltage |
+4.5V~+6V |
|
Current |
＜50mA |
|
Working temperature |
﹣25℃~﹢70℃ |
|
Storage temperature |
﹣40℃~﹢85℃ |
|
Working humidity |
＜95%（﹢25℃） |
|
Protocol |
ISO 18000-6C/6B/EPC C1G2/GBT 29768-2013/GJB 7377.1 |
|
Working Frequency |
840MHz~960MHz |
|
Area Supported |
US, Canada and other regions following U.S. FCC Europe and other regions following ETSI EN 302 208 with & without LBT regulations Mainland China Japan Korea Malaysia Chinese Taiwan |
|
Output Power |
0~35dBm |
| Reading Range | 0~40m |
|
Reading Range |
Reading Range |
|
Output power accuracy |
±1dB |
|
Receiving sensitivity |
＜-80dBm |
|
Tag RSSI |
Supported |
|
Antenna connection protection |
Supported |
|
Communication Interface |
TTL UART Interface |
|
GPIO |
2 inputs, 2 outputs (3.3 Electric Level) |
|
Maxcommunication baud rate |
460800bps |
|
Cooling method |
External heat sink air-cooled |
Attention:
◆ Power voltage should not exceed6V, otherwise it may damage internal electric protection.
1.1 Absolute Maximum Ratings
|
Parameter |
Symbol |
Min |
Typ |
Max |
Unit |
|
Storage temperature |
Ts |
-40 |
|
+85 |
℃ |
|
Junction temperature |
Tj |
|
|
+125 |
℃ |
|
Supply voltage |
VCC |
+3.7 |
+5 |
+6 |
V |
|
Supply Current |
A |
|
|
1200 |
mA |
1.2 Specifications
VCC = 5V，TA = 25℃
|
Parameter |
Conditions |
Min |
Typ |
Max |
Unit |
|
RF |
|||||
|
Frequency Range |
|
840 |
|
960 |
MHz |
|
Frequency Step |
GB(FCC) |
|
250(500) |
|
KHz |
|
Transmitting Frequency Stability |
Operating Temperature +25℃ |
|
|
10 |
PPm |
|
Output Power |
|
0 |
|
30 |
dBm |
|
Transmitting Power, Step |
|
|
1 |
|
dB |
|
Power Flatness |
|
-1 |
|
+1 |
dB |
|
Occupy bandwidth |
Output Power = 25dBm |
|
250 |
|
KHz |
|
ACP |
±250 kHz(±1 CH) ±500 kHz(±2 CH) |
|
-40 -60 |
|
dBc |
|
Output Load VSWR |
Output Power = 30dBm |
|
1.5 |
|
|
|
Power Supply |
|||||
|
Supply Voltage |
|
3.7 |
5 |
6.0 |
V |
|
Supply Current |
Output Power = 25dBm |
|
1200(30dBm) |
|
mA |
|
Temperature Range |
|||||
|
Operating Temperature |
Output Power = 25dBm |
-20 |
|
+70 |
℃ |
It can be applied to various wireless RFID application solutions such as small readers, smart cabinet, articles and logistics management, warehouse management, animal management, article anti-counterfeiting, electronic goods monitoring and manufacturing and processing, and production automation.
Previous :
Hopeland Smart series RFID Module Interface Board Testing boardnext :
2-port Linux 2.6 UHF RFID module CL7206A5Any inquiries and suggestions are welcomed and we are pleased to answer no matter for our company, products or services.
HL7206C8A is UHF RFID reader module board for developing 8-port fixed RFID reader. Based on Impinj R2000 chip platform, with 8 channels of SMA interfaces for RFID antennas. It support multiple-tag and long range reading, suitable for applications like gate access control, warehouse management, asset management etc.
HZ540 module is a miniaturized UHF RFID reader. The core components of the core platform adopts R2000 which is a high-performance highly integrated reader IC and integrated with analog RF front-end and baseband digital signal processing modules etc.
HZ580 is UHF RFID reader module board for developing 8-port fixed RFID reader. Based on Impinj R2000 chip platform, with 8 channels of SMA interfaces for RFID antennas, it support multiple-tag and long range reading.
It is partner for UHF RFID reader module, can be compatible with CL7206D2 and CL7206D3 module If you want a small RFID reader writer, you need it If you want a small reader for production line control, you need it If you want a working station reader,you need it
The CL7206D2 module is a miniaturized UHF RFID reader. The core component adopts R2000 as the core platform. R2000 is a high-performance and highly integrated reader IC, integrating functions such as analog radio frequency front end and baseband digital signal processing module,etc.The user only needs to do power processing on the basis of the module, which can be easily controlled through the API function library, suitable for the development of various application scenarios.
The CL7206D3 module is a miniaturized and cost-effective UHF RFID reader module. The single-chip RFID SOC scheme is specially designed for the size limited embedded RFID application environment.The user only needs power supply to work through the UART port control module, which is easy to be integrated into various electronic equipment.
TYPICAL APPLICATIONS: Handheld RFID Reader integration Integrated RFID Reader RFID Tag Writer RFID embedded equipment such as Tag Printer, ATM, anti-counterfeiting equipment, identification system equipment, WMS system channel equipment and so on, intelligent mobile phone, handheld terminal, desktop reader, industrial control device and so on.
General Description CL7206A5 is 2 ports RFID Reader Board, with Impinj R2000 chip, with good performance.
For inquiries about our products or pricelist, please leave to us and we will be in touch within 24 hours.
3F, F5# Bldg, TCL International E-city, No.1001, Zhongshan Park Road, Nanshan district, Shenzhen,P.R.China Post
whatsapp telegram ：
+8618682338756
Copyright © 2026 Shenzhen Hopeland Technologies CO., Ltd.All Rights Reserved.
